Cookie Notice

This online store uses cookies to remember users, enable checkout and to collect aggregate information that allows us to analyze traffic patterns on our site (no personal information is stored). For more information you can read our Privacy Policy.

Gas Leak and Flame Detectors, Analyzers and Alarm Controllers

ESP SAFETY  100-0001-M11-SS

ESP SAFETY 100-0001-M11-SS
  • DESCRIPTION
  • FEATURES
  • SPECIFICATIONS
  • LITERATURE

ESP Safety SGOES Infrared Gas Detector for measurement of hydrocarbon gases (Methane, Propane, Butane, Pentane, Hexane, Cyclopentane or Ethanol). Factory calibrated at 0%, 20%, 50%, and 95% LEL. Analog 4-20 current loop with HART, Digital RS-485 Modbus RTU and 3 relays. Includes protective weather cover and mounting hardware. IP66. SIL2 Rated. FM, ABS, IECEx, CE and CSA, Class I Division 1 Approved. Stainless steel construction. T90 response time= < 5 seconds (methane).

Part# with Options:        100-0001-M11-SS
Price with Options:        1.440,00

Options:    

Gases
(1) Gases for ESP Safety SGOES

  Availability 5 Weeks  ]


ESP Safetys Model SGOES Gas Detector measures the concentration of hydrocarbon gases present in the monitored environment. The SGOES is configured to report alarms when the gas concentrations in the environment reach the two independently programmable levels, expressed as a percentage of the lower explosive limit (LEL) in air. As determined by application requirements, the SGOES is factory calibrated with one of eight hydrocarbon-based gases (typically methane or propane). Conversion factors are used to correct for gases other than the factory calibration gas.

The SGOES sensor detects and quantifies the presence of hydrocarbons by measuring their absorption of infrared light (IR). Because the device does not depend on the presence of oxygen in a mixture of gases, it can function effectively in environments where other sensor technologies cannot. Moreover, it is not sensitive to gases such as nitrogen, oxygen, carbonic acid, ammonia, and hydrogen sulfide, that may adversely affect other types of sensors. This makes the SGOES an excellent choice for environments where non-hydrocarbon gases are present and where monitoring of hydrocarbons like methane and propane is required.

The explosion-proof design of SGOES makes it ideal for use in hazardous environments such as:

  • Oil and gas facilities
  • Pumping stations
  • Refineries
  • Tank farms
  • Pipelines
  • Loading racks.

SGOES is FM-certified for use in potentially explosive gas/vapor environments in compliance with FM3615 and CSA-C22.2 No 30 standards for explosion proof protection. In addition, it meets CSA standard E60079-1 for flameproof protection, and ANSI/ISA standard 12.13.01-2000 for performance of combustible gas detectors.

The SGOES gas detector is typically used as an indicating device in fire and gas (F&G) detection and suppression systems as well as emergency shutdown (ESD) systems.

The rugged SGOES design allows it to be used in harsh environments. It will operate from -76F to +185F (-60C to +85C) at relative humidity up to 95%

Applications
  • Drilling and production platforms
  • Shipping tankers, freighters, and other vessels
  • Fuel loading facilities
  • Refineries, bulk terminals, and tank farms
  • LNG/LPG processing and storage facilities
  • Compressor stations and pipeline facilities
  • Petrochemical, paint, and fertilizer plants
  • Power plants and gas turbine facilities
  • Transportation facilities (airports and subways)
  • Oil and gas fired boilers / furnaces
  • Environmental regulation monitoring
Features and benefits
  • High sensitivity to all hydrocarbon gases/vapors for maximum property protection and personal safety
  • Open path optical sensor - no physical contact between sensor and environment
  • IR optical path obstruction monitoring (dust, paint, etc.) provides maintenance alerts
  • Heated optics, secondary heater function helps to prevent condensation problems
  • Low power (<4.5W) operation for cost savings
  • Versatile indoor/outdoor installation
  • Industry standard analog, digital, and relay outputs are used for remote alarm and fault indications
  • Resistance to vibration ensures reliability and durability
  • Operates effectively in fog and high humidity
  • Wide operating temperature range provides flexibility and reliability
  • Tri-color status LED on the device is easily viewable for a visual report of the devices operating status
Calibration

Factory calibrated at 0%, 20%, 50%, and 95% LEL with methane or propane.

Calibration with NIST traceable calibration gas is optional.

Configuration Options

Standard Gas options:

  • Methane
  • Propane
  • Butane
  • Pentane
  • Hexane
  • Isobutane
  • Cyclopentane
  • Ethanol

Custom Gas configuration options:

  • Volatile Organic Compounds (VOC)
  • Optional calibration with gas mixtures directly traceable to NIST standard reference materials.

Specifications
Electrical Characteristics
Voltage18 to 32 VDC
Power2 W, standby
4.5 W, during alarm
7.9 W, heater on maximum
Outputs4-20mA, analog (0 to 100% LEL) two alarm relays (isolated, dry contact type) with programmable thresholds fault relay indicating optical path obstruction
RS-485 Modbus RTU, HART, Ethernet
Recommended Wiring16 AWG (1.5mm) for 4000ft (1200m) max
Performance
GasesMethane, propane, butane, pentane, hexane, isobutane, cyclopentane, ethanol (The target gas is factory configurable according to customer request.)
Range0 to 100% LEL (lower explosive level in air)
Accuracy2% LEL, for 0 to 100% LEL
HumidityUp to 95%, non-condensing (withstands up to 100% RH for short periods)
Response Time (for 100% LEL Methane)50% full scale < 1.9 seconds
90% full scale < 5.0 seconds
Operating Temperature-76F to +185F (-60C to +85C)
Extended Operating Temperature (By Request)-76F to +194F (-60C to +90C)
Storage temperature-58F to +125F (-50C to +50C)
Ingress ProtectionIP66
Wiring14 AWG (2.08 mm) or 16 AWG (1.31 mm)
Shielded cable is recommended
SIL RatingSIL 3
Ingress ProtectionIP66
SIL RatingSIL 2, FM/CSA Class I Division 1 certification
Warranty5 years
Mechanical Characteristics
Material316 Stainless Steel
Diameter5.5 (14 cm)
Length11.5 (29 cm)
Weight14.3lbs (6.5 kg)
Conduit Entry3/4 NPT
 


B2B Checkout Options: Designated Carrier and Tax-Exempt purchase
Payment Options: Credit Card, Credit Card Over the Phone, PAYPAL, Wire Transfer and Check

> ACCESSORIES - RELATED - CONSUMABLES :    2 Items found.
100-0008-A1
(4725)

ESP SAFETY  100-0008-A1

ESP Safety Vector 2-channel gas detector controller . Operates as a stand-alone display for a variety of ESP sensors which can be remotely located up to 500 feet away over 4-wire RS-485. Sensor head can also be attached. Includes analog 4-20 current loop with HART, Digital RS-485 Modbus RTU and 4 relays. Explosion-proof housing. IP67. SIL 2, FM/CSA Class I Division 1 certification. It can be configured with one or two optional sensors, including:Chlorine (Cl2), Carbon Monoxide (CO), Carbon Dioxide (CO2), Hydrogen (H2), Hydrogen Sulfide (H2S), Methane (CH4), Ammonia (NH3), Oxygen (O2), Propane (C3H8) and Sulfur Dioxide (SO2).

Configure

922,50  
100-0009-01-A
(4724)

ESP SAFETY  100-0009-01-A

ESP Safety UPES 16-channel (4-20mA) gas and flame detector controller, or 128 Modbus digital RS-485 channels (16 ports 8 channels each) for ESP Devices. Includes Modbus RS-485 output port (both analog and digital versions), power supply and 3 alarm relays and audible alert. 3Ux19" modular size, FM & ABS Class I Division 1, Ex CE and IECEx Approved.

Configure

1.732,50  
> LEL INFRARED :    3 Items found.
P-3033
(6722)

PROSENSE  P-3033

Prosense P-XY35 Gas Detector with Infrared sensor for Hydrocarbons (Methane, LPG, Propane, Hydrogen, Gasoline, Pentane, Hexane, nButane) with range 0-100% LEL. Ex-proof housing and SS316 stainless steel sensor head. 4-20mA Analog and Modbus RS485 RTU outputs, optional Relay card. ATEX/IECEx approval (Zone 1 or Zone 2). IP65, Optional IP66 Adaptor.

Configure

693,00  
PQN-3033-1/2
(6946)

PROSENSE  PQN-3033-1/2

Prosense PQN-XY33 Gas Detector with Infrared sensor for Hydrocarbons (Methane, LPG, Propane, Hydrogen, Gasoline, Pentane, Hexane, nButane) with range 0-100% LEL. Ex-proof housing and SS316 stainless steel sensor head. 4-20mA Analog and Modbus RS485 RTU outputs, optional Relay card. ATEX/IECEx (Zone 1, Zone 2 or M2) approvals, optional SIL2. IP65, Optional IP66 Adaptor and remote display.

Configure

808,50  
PQD-3033-1/2
(6719)

PROSENSE  PQD-3033-1/2

Prosense PQD-XY33 Gas Detector with Infrared sensor for Hydrocarbons (Methane, LPG, Propane, Hydrogen, Gasoline, Pentane, Hexane, nButane) with range 0-100% LEL. Ex-proof housing and SS316 stainless steel sensor head. 4-20mA Analog and Modbus RS485 RTU outputs, optional Relay card. OLED Display. ATEX/IECEx (Zone 1, Zone 2 or M2) approvals, optional SIL2. IP65, Optional IP66 Adaptor.

Configure

924,00