Esp Safety 100-002302 | Combustibles | Open Path | Gasdetectorseu
Gas Leak and Flame Detectors, Analyzers and Alarm Controllers

ESP SAFETY   100-002302

ESP SAFETY 100-002302

DETECTORS / OPEN PATH
COMBUSTIBLES

7.865,75 €  [4 Weeks]
  • DESCRIPTION
  • FEATURES
  • SPECIFICATIONS
  • LITERATURE
ESP Safety TGAES Open Path Gas Detector for continuos monitoring of combustible hydrocarbon gas concentrations (0-5 LEL/m) (Detects Methane and most common hydrocarbon gases including ethane, propane, butane and propylene). Transmitter and receiver modules. Includes 4-20mA, HART and RS-485 Modbus RTU serial communication outputs. 316 stainless steel enclosures. Tri-color status LED. FM, CSA, CE and IECEx Approved. SIL2 Rated.

100-002302
7.865,75

Gases

   4 Weeks  ]


The Model TGAES hydrocarbon gas detector is an open path gas detection system that provides continuous monitoring of combustible hydrocarbon gas concentrations in the range of 0 to 5 LEL/m, over a distance of 15 to 650 feet (5 to 200 meters). Standard system outputs include 4-20mA, HART and RS-485 Modbus RTU serial communication. TGAES is capable of detecting most hydrocarbon gases and vapors including methane, propane, butane, propylene and others.

No direct electrical connection between the two modules is required. In some applications, one TGAES detection system can provide protection equivalent to as many as eight point detectors.

The TGAES transmitter module illuminates a direct linear path ending at the TGAES receiver module. As flammable hydrocarbon gases intersect the light beam between the two modules, certain IR wavelengths are absorbed by the gas, while other IR wavelengths are not. A pair of optical detectors and associated electronics located in the receiver module measures the absorption for both the active wavelength and reference wavelength. The ratio of absorption between the active and reference wavelengths determines the amount of gas intersecting the beam along its entire length. A microprocessor computes the gas concentration and converts the value into a 4-20mA signal and MODBUS register value.

Included
  • 3/4" NPT threaded plugs
  • Mounting Hardware
  • TGAES transmitter and receiver
  • Aperture plates used for installation distance of less than 60 meters
  • Glass test filter 1 each for every 10each TGAES sets (1each per order less than 10 TGAES)
  • Mounting Plates
  • Visors
Applications
  • Power stations and storage facilities
  • Tank ships and other vessels
  • Refineries, bulk terminals, tank farms
  • LNG/LPG processing and storage
  • Chemical, paint and fertilizer plants
  • Power plants and gas turbines
  • Transportation facilities
Features and benefits
  • Detects methane and most common hydrocarbon gases including ethane, propane, butane and propylene with equal sensitivity
  • Detection range of up to 200m
  • T90 less than 5 seconds
  • Corrosion-resistant 316 stainless steel enclosures
  • Widest operating temperature range: -40°F to +140°F, (-40°C to +60°C)
  • Ultra-reliable xenon flash-lamp
  • Tri-color status LED or 96 character LCD for full graphical indication w/ SSS-903
  • 4-20mA analog, MODBUS digital and relay outputs
  • Convenient HART communicator port
  • Primary heater protects optics from ice and secondary heater protects the internal electronics
  • Able to operate even when obscured by fog, rain, dust, snow, or blowing sand.

The TGAES Open Path Gas Detector is ideal for monitoring hydrocarbon leaks at fuel storage facilities.

The TGAES is used for wide-area monitoring across potential leak sources, such as pumps and valves.

When used in conjunction with point gas detectors such as the SGOES, the TGA Open Path Detector is a key element in a comprehensive early detection strategy.

Specifications
Electrical Characteristics
Voltage18 - 32VDC (not including heater)
Transmitter: 7.0W @ 24VDC
Receiver: 6.0W @ 24VDC
Detectable GasesMethane, propane, ethane, isobutylene, pentane, cyclopentane, hexane, propylene, methanol
Detection Range1.0 LEL m
2.5 LEL m
5.0 LEL m
Visual IndicatorsTri-color LED:
Red: Alarm
Yellow: Fault
Green: Normal
Detection Range from 15ft to 650ft (5 to 200m)
Output Signals4-20mA
HART
RS-485 Modbus RTU
Dry contact relays
ResponseT90 < 5 seconds
Accuracy+/- 0.25 LEL- meters or 10% of sapplied gas range
Temperature-40°F to +140°F Operating (-40°C to +60°C)
0 - 100% relative humidity
Housing316 Stainless Steel with dual 3/4” NPT cable entry ports
DimensionsLength: 10.43” (265 mm)
Diameter: 4.5” (108 mm)
Weight: 16 Lbs. (7.5 kg)
each module with mounting bracket
Warranty3 years
Included ComponentsTGAES transmitter module
TGAES receiver module
Standard AccessoriesProtective hoods for receiver and transmitter;
ESP Commander RS-485 configuration and monitoring software for Windows-compatible PC
Optional ComponentsModel SSS-903 Receiver with illuminated LCD status display;
HART interface cable
Export Info
Made inUnited States

 Info/Quote Request
 Reseller & Volume Discounts
 Shipping Rates

B2B Checkout Options: Designated Carrier and Tax-Exempt purchase
Payment Options: Credit Card, Credit Card Over the Phone, PAYPAL, Wire Transfer and Check

> ACCESSORIES - RELATED - CONSUMABLES :    2 Items found.
100-0008-A1
(4725)

ESP SAFETY  100-0008-A1

ESP Safety Vector 2-channel gas detector controller . Operates as a stand-alone display for a variety of ESP sensors which can be remotely located up to 500 feet away over 4-wire RS-485. Sensor head can also be attached. Includes analog 4-20 current loop with HART, Digital RS-485 Modbus RTU and 4 relays. 316 Stainless Steel Explosion-proof housing. IP67. SIL 2, FM/CSA Class I Division 1 certification. It can be configured with one or two optional sensors, including: Chlorine (Cl2), Carbon Monoxide (CO), Carbon Dioxide (CO2), Hydrogen (H2), Hydrogen Sulfide (H2S), Methane (CH4), Ammonia (NH3), Oxygen (O2), Propane (C3H8) and Sulfur Dioxide (SO2).

Configure

897,90 € 
100-0009-01-A
(4724)

ESP SAFETY  100-0009-01-A

ESP Safety UPES 16-channel (4-20mA) gas and flame detector controller, or 128 Modbus digital RS-485 channels (16 ports 8 channels each) for ESP Devices. Includes Modbus RS-485 output port (both analog and digital versions), power supply and 3 alarm relays and audible alert. 3Ux19" modular size, FM & ABS Class I Division 1, Ex CE and IECEx Approved.

Configure

1.686,30 € 
Cookie Notice

This online store uses cookies to remember users, enable checkout and to collect aggregate information that allows us to analyze traffic patterns on our site (no personal information is stored). For more information you can read our Privacy Policy.