Cookie Notice

This online store uses cookies to remember users, enable checkout and to collect aggregate information that allows us to analyze traffic patterns on our site (no personal information is stored). For more information you can read our Privacy Policy.

Gas Leak and Flame Detectors, Analyzers and Alarm Controllers

PROSENSE  PPS+-CO

PROSENSE PPS+-CO (1)
  • DESCRIPTION
  • FEATURES
  • SPECIFICATIONS
  • LITERATURE

Prosense PPS+-CO Addressable Gas Detector with Electrochemical sensor for Carbon Monoxide (CO) with range 0-300ppm. ABS Plastic housing. Modbus RS485 RTU output. IP54. For Parking Garages and Tunnels.

173,25       

  Availability 2 Weeks  ]


Certified with EN 50545-1

PPS+ is the first system which acquired the certification of EN 50545-1, the standard for carparks.

Specially Designed for Carparks

Prosense PPS+ addressable gas detectors are designed and developed for continuously monitoring carbon monoxide for vehicles with gasoline and nitrogen dioxide for vehicles with diesel in closed car parks and tunnels.

Easy Communication

PPS+ Series gas detectors are managed by PPS Manager Control Panel via Modbus RS485 RTU serial connection

Increasable Number of Zones

PPS Manager Control Panel has up to four zones and each zone capable to manage up to 32 detectors.

Different Gases in Same Zone

The detectors for different gases can be integrated into same zone and can be monitored separately. Totally, 128 detectors can be managed by PPS Manager.

Suitable Solution for Ventilation System

PPS Manager has three relay outputs for each zone in order to manage fan ventilation levels. Also, 1 Alarm and 1 Fault relay contacts are integrated into the panel to monitor overall status.

Visual Indicators

Four individual LEDs in each zone inform the operator about current status as an addition to the panel display.

Power-Cut Protection

PPS Control Manager offers optional battery connections in case of power cut.

Management System Integration Output

PPS Manager provides Modbus RS 485 RTU output that can be integrated with SCADA, DCS or BMS systems.

Automatic Recognition of Detectors

PPS monitoring system automatically detects the type of detectors and adjusts the related measurement ranges and alarm levels.

Monitoring Options

You can select an average or an maximum value for every single zone and monitor that value.

Single Detector Monitoring

Monitoring every single detector in every single zone is possible with PPS Manager.

Specifications PPS+-CO
Target Gas Carbon Monoxide
Sensor Type Electrochemical
Output Signal Modbus RS485 RTU
Sensor Warm-Up 60sec
Response Time/b> <30sec
Measuring Range/b> 0-300ppm
Accuracy %1
Operating Temperature ‐20C ~ +50C
Humidity 5 ~ 95%RH
Input Voltage Min 10VDC - Max 18VDC - Nominal 12VDC
Power Consumption Max. 2W
Cable Entry PG11
Junction Box ABS Plastic / IP54
Dimensions 150x94,5x58mm
Weight 250gr
Standards EN 50545-1:2015 EN 50270
Warranty 12 months from date of shipment from Prosense Technology
Export Info
Made inTurkey
Harmonized Tariff Code (HTC)9027102000
 
Will you be buying a large quantity of items? or are you a Reseller or OEM? Please contact us and make sure you mention it to our specialist to discuss if we can offer you a discount.


B2B Checkout Options: Designated Carrier and Tax-Exempt purchase
Payment Options: Credit Card, Credit Card Over the Phone, PAYPAL, Wire Transfer and Check

> ACCESSORIES - RELATED - CONSUMABLES :    3 Items found.
PPS-LPG
(6815)

PROSENSE  PPS-LPG

Prosense PPS-LPG Addressable Gas Detector with Catalytic sensor for Liquid Petroleum Gas (LPG) with range 0-100% LEL. ABS Plastic housing. Modbus RS485 RTU output. IP54. For Parking Garages and Tunnels.



132,00  
PPS+-NO2
(6814)

PROSENSE  PPS+-NO2

Prosense PPS+-NO2 Addressable Gas Detector with Electrochemical sensor for Nitrogen Dioxide (NO2) with range 0-30ppm. ABS Plastic housing. Modbus RS485 RTU output. IP54. For Parking Garages and Tunnels.



239,25  
PPS-KP1
(6816)

PROSENSE  PPS-KP1

Prosense PPS Manager, Addressable Gas Detector Controller, Alarm Panel with up to 4 open loops (32 detectors each) for up to 128 detectors. Polycarbonate housing. LCD screen, LED Indicators (Alarm, Fan and Fault), Buzzer, 2 Fan + 1 Fault Relays for each zone and Common 1 Alarm + 1 Fault Relays; 1 Modbus RTU Output. IP66. For detection of carbon monoxide (CO), Nitrogen Dioxide (NO2) and Propane (LPG) with optional Modbus RTU addressable detectors. For Parking Garages and Tunnels.

Configure

354,75  
> CARBON MONOXIDE :    5 Items found.
PC3-4424
(6802)

PROSENSE  PC3-4424

Prosense PC3-4424 Gas Detector with Electrochemical sensor for Carbon Monoxide (CO) with range 0-300 ppm. Epoxy painted aluminum housing and Nickel Plated Brass sensor head. 4-20mA Analog and Modbus RS485 RTU outputs. Optional Relay Outputs. IP65, Zone 2.

Configure

338,25  
P-4434
(6777)

PROSENSE  P-4434

Prosense P-4434 Gas Detector with Electrochemical sensor for Carbon Monoxide (CO) with ranges 0-300ppm to 0-1000ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20mA Analog and Modbus RS485 RTU outputs, optional Relay card. ATEX/IECEx approval (Zone 1 or Zone 2). IP65, Optional IP66 Adaptor.

Configure

420,75  
PQN-4434-1/2
(6949)

PROSENSE  PQN-4434-1/2

Prosense PQN-4434 Gas Detector with Electrochemical sensor for Carbon Monoxide (CO) with ranges 0-300ppm, 0-500ppm or 0-1000ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20mA Analog and Modbus RS485 RTU outputs, optional Relay card. ATEX/IECEx (Zone 1, Zone 2 or M2) approvals, optional SIL2. IP65, Optional IP66 Adaptor and remote display.

Configure

577,50  
PQD-4434-1/2
(6738)

PROSENSE  PQD-4434-1/2

Prosense PQD-4434 Gas Detector with Electrochemical sensor for Carbon Monoxide (CO) with ranges 0-300ppm, 0-500ppm or 0-1000ppm. Ex-proof housing and SS316 stainless steel sensor head. 4-20mA Analog and Modbus RS485 RTU outputs, optional Relay card. OLED Display. ATEX/IECEx (Zone 1, Zone 2 or M2) approvals, optional SIL2. IP65, Optional IP66 Adaptor.

Configure

693,00  
100-0008-A1/100-0015-CO
(4751)

ESP SAFETY  100-0008-A1/100-0015-CO

ESP Safety Vector 2-channel gas detector controller with smart Plug-In Sensor to Detect Carbon Monoxide (CO) 0-100, 0-500 or 0-1000ppm. Operates as a stand-alone display for a variety of ESP sensors which can be remotely located up to 500 feet away over 4-wire RS-485. Sensor head can also be attached. Includes analog 4-20 current loop with HART, Digital RS-485 Modbus RTU and 4 relays. 96-Character OLED Screen. Explosion-proof housing. IP67. SIL 2, FM/CSA Class I Division 1 certification.

Configure

1.440,00