Cookie Notice

This online store uses cookies to remember users, enable checkout and to collect aggregate information that allows us to analyze traffic patterns on our site (no personal information is stored). For more information you can read our Privacy Policy.

Gas Leak and Flame Detectors, Analyzers and Alarm Controllers

PROSENSE  PQN-7133-1/2

PROSENSE PQN-7133-1/2 (1)
  • DESCRIPTION
  • FEATURES
  • SPECIFICATIONS
  • LITERATURE

Prosense PQN-7133 Gas Detector with Infrared sensor for Carbon Dioxide (CO2) with ranges 0-5000ppm or 0-5%vol. Ex-proof housing and SS316 stainless steel sensor head. 4-20mA Analog and Modbus RS485 RTU outputs, optional Relay card. ATEX/IECEx (Zone 1, Zone 2 or M2) approvals, optional SIL2. IP65, Optional IP66 Adaptor and remote display.

Part# with Options:        PQN-7133-1/2
Price with Options:        808,50

Options:    

Cable Entries
(1) Cable Entries for Prosense PQ Series Detectors
Range
(2) Range for Prosense PQD-7133
Relays
(3) Relays for Prosense PQD
IP66 Adaptor
(4) Stainless Steel Sensor Adaptor for Prosense PQD & P
No calibration port
Stainless Series Enclosure
(5) Stainless Series Enclosure for Prosense PQ
SIL2
(6) SIL2 Certification for Prosense PQ Detectors by TUV Rheinland (2)
HART
(7) HART for Prosense PQD-S
Remote Display
(8) Remote Display Module with Ex Junction Box for Prosense PQN Detectors
RS232 cable includes PR-NYY12 glands

Availability 2 Weeks  ]


PROSENSE "PQN" Series fixed gas detectors are certified with ATEX/IECEx and SIL2.

Ex-proof Safety

The continuous measurement of toxic and explosive gases is done safely in hazardous areas thanks to the ex-proof housing.

Performance Approval

It complies with the measurement performance criteria in accordance with the IEC EN 60079-29-1 standard.

Functional Safety

Prosense promotes SIL approved products to reduce safety risks associated with increasingly complicated systems as malfunctioning equipment could pose a potential risk. PQ series has ongoing process for SIL-2.

Robust and Durable

SS316 stainless steel sensor head performs perfectly under harsh environmental conditions with the IP65/ IP66 protection class.

Accurate Readings

Pellistor, Electrochemical, PID, and Infrared sensors undoubtedly provide an accurate and sensitive measurement.

Ready to Operate

4-20mA Analog and Modbus RS485 RTU outputs are provided onboard to operate properly without any additional setup.

Easy Maintenance

PQN Series detectors allow sensor replacement with pre-calibrated sensor head thanks to the Procell technology.

Automatic Calibration

Detector calibration can be done automatically via preset values recorded in detector software once calibration requirements are provided.

Pellistor-Saver Mode

Detectors power off the sensor in high gas concentration in order to properly secure the operational lifetime of pellistor sensor.

Auto Analog Signal Calibration and Monitoring

PQN Series detectors continuously check the analog output signal level to match the measurement level before promptly transferred to the panel. PQN Series adjusts the signal level in case of any deviation and generates a fault signal when the adjustment fails.

Zero Suppression

Adjusting, the detector can show a certain measurement level as 0 (zero) to avoid unnecessary concerns.

Simple External Equipment Control

Optional relay module enables you to use it as an independent gas detection system with two arbitrarily adjustable concentration alarms and one fault alarm.

Continuous Self-Test

The detectors check itself continuously to make sure it operates perfectly and indicates a fault in case of any failure.

Adjustable Parameters

All parameters can be easily changed according to the application requirements or facility standards.

Maintenance via Software

Prosense provides software to maintain your active system easily and calibrate the gas detectors properly via computer.

Applications
  • Process Industry
  • Water Treatment
  • Chemical Industry
  • Food and Medicine Facilities
  • Metal Industry
  • Gas Distribution Stations
  • Laboratories

Specifications PQN
Sensing Element Infrared
Output Signal 4-20mA Analog and Modbus RS485 RTU
Sensor Warm-Up 60sec
Response Time(T90) <30sec
Accuracy %2
Operating Temperature -40C ~ +70C
Humidity 0~ 100%RH **
Input Min 10VDC - Max 32VDC - Nominal 24VDC
Event Logging Records alarm, fault and maintenance events up to 250 logs
Power Consumption Max. 4W
Optional Relay Outputs 2 Alarms (Programmable) and 1 Fault
(All relays are NO/NC adjustable)
Cable Entry 3x 1/2''NPT Standard / 3x3/4''NPT / 3xM20
IP Rating IP65/IP66
Optional IP66 (Sensor Head)
Junction Box Epoxy Painted Die-Cast Aluminum / 316 Stainless Steel
Sensor Head 316L Stainless Steel
Dimensions/Weight 196,96x145,99x112mm / 2100gr
ATEX Marking II 2G Ex db IIC T6 Gb
II 2G Ex mb db IIC T6 Gb
I M2 Ex db I Mb
Hazardous Class Zone 1 - Zone 2 - M2
Certificates ExVeritas 18 ATEX 0371X
IECEx EXV 18.0021X
FTZU 18 ATEX 0086
IEP12 ATEX 6118X
SIL2 (Pending)
Standards IEC EN 60079-0
IEC EN 60079-1
IEC EN 60079-18
IEC EN 60079-29-1
*When set to continuous measurement.
**Sensor dependent.
Warranty 12 months from date of shipment from Prosense Technology
Export Info
Made inTurkey
Harmonized Tariff Code (HTC)9027102000
 


B2B Checkout Options: Designated Carrier and Tax-Exempt purchase
Payment Options: Credit Card, Credit Card Over the Phone, PAYPAL, Wire Transfer and Check

> ACCESSORIES - RELATED - CONSUMABLES :    7 Items found.
PR-KT12
(6978)

PROSENSE  PR-KT12

Prosense 1/2" NPT ATEX Certified Blind Plug for P, PQ and B Series gas detectors



3,97  
P-NYY12
(6976)

PROSENSE  P-NYY12

Prosense 1/2"NPT ATEX Certified Cable Gland for P, PQ and B Series gas detectors



11,88  
PK-K30T
(6768)

PROSENSE  PK-K30T

Prosense Teflon Calibration cup/cap for P, PQ and B Series gas detectors, tubing entry 4mm diameter tubing. Optional SS316

Configure

41,25  
P-ASU-2
(6989)

PROSENSE  P-ASU-2

Prosense flow adapter cell for SH30 and SH20 sensor heads used in PQ, P and PC3 series, gas sampling applications. For 6mm OD Tubing made of corrosion-resistant Teflon.



277,20  
S-DP4
(6764)

PROSENSE  S-DP4

Prosense S-DP4 Gas Detector Controller, Alarm Panel for Up to 4 Analog 4-20 mA gas detectors. Monitors explosive (LEL) and toxic(ppm, %VOL), Alarm and Fault LED indicators for each detector and buzzer. Fault, Alarm1, Alarm2 and AUX Relays. Optional Modbus RS485 output and Alarm/Fault Relays for each channel. Polycarbonate Housing, IP66

Configure

511,50  
S-DP8
(6765)

PROSENSE  S-DP8

Prosense S-DP8 Gas Detector Controller, Alarm Panel for Up to 8 Analog 4-20 mA gas detectors. Monitors explosive (LEL) and toxic(ppm, %VOL), Alarm and Fault LED indicators for each detector and buzzer. Fault, Alarm1, Alarm2 and AUX Relays. Optional Modbus RS485 output and Alarm/Fault Relays for each channel. Polycarbonate Housing, IP66

Configure

627,00  
S-DP32
(6985)

PROSENSE  S-DP32

Prosense S-DP32 Gas Detector Controller, Alarm Panel for Up to 32 addressable gas detectors. Monitors explosive (LEL) and toxic(ppm, %VOL). Fault, Alarm1, Alarm2 and AUX Relays. RS485 interface and status LEDs for each channel. LCD Display. ABS Housing, IP66.

Configure

800,25  
> CARBON DIOXIDE :    3 Items found.
P-7133
(6786)

PROSENSE  P-7133

Prosense P-7133 Gas Detector with Infrared sensor for Carbon Dioxide (CO2) with range 0-5000ppm or 0-5% vol. Ex-proof housing and SS316 stainless steel sensor head. 4-20mA Analog and Modbus RS485 RTU outputs, optional Relay card. ATEX/IECEx approval (Zone 1 or Zone 2). IP65, Optional IP66 Adaptor.

Configure

635,25  
PQD-7133-1/2
(6747)

PROSENSE  PQD-7133-1/2

Prosense PQD-7133 Gas Detector with Infrared sensor for Carbon Dioxide (CO2) with ranges 0-5000ppm or 0-5%vol. Ex-proof housing and SS316 stainless steel sensor head. 4-20mA Analog and Modbus RS485 RTU outputs, optional Relay card. OLED Display. ATEX/IECEx (Zone 1, Zone 2 or M2) approvals, optional SIL2. IP65, Optional IP66 Adaptor.

Configure

924,00  
100-0008-A1/100-0015-CO2
(4752)

ESP SAFETY  100-0008-A1/100-0015-CO2

ESP Safety Vector 2-channel gas detector controller with smart Plug-In Sensor to Detect Carbon Dioxide (CO2) 0-2% vol, 0-5% vol or 0-3000ppm. Operates as a stand-alone display for a variety of ESP sensors which can be remotely located up to 500 feet away over 4-wire RS-485. Sensor head can also be attached. Includes analog 4-20 current loop with HART, Digital RS-485 Modbus RTU and 4 relays. 96-Character OLED Screen. Explosion-proof housing. IP67. SIL 2, FM/CSA Class I Division 1 certification.

Configure

1.440,00