Prosense Pq-smpsys-cat-30 | Lel Catalytic Bead | Sample Draw | Gasdetectorseu
Gas Leak and Flame Detectors, Analyzers and Alarm Controllers

PROSENSE   PQ-SMPSYS-CAT-30

PROSENSE PQ-SMPSYS-CAT-30
  • DESCRIPTION
  • FEATURES
  • LITERATURE
Prosense Sampling System with PQD Catalytic Bead Detector to monitor combustible gases. Includes pump, temperature control unit, 100 micron particulate and humidity filter, two solenoid valves, cooler and timer. Modbus RTU, 4-20mA, 2 Alarm and 1 Fault Relay outputs. IP65 ABS plastic enclosure. Can be calibrated to Methane, LPG Propane, Gasoline/Petrol Vapor, Butane, Pentane, Hexane, Hydrogen, Toluene, Methyl Alcohol, Heptane, Octane, Ethyl Alcohol, Iso Propanol, Ethane, Acetone, MEK, Ethyl Acetate, Amonia, Ethylene, JP8 Fuel, Benzene, Cyclo Hexane, Cyclo Pentane and other Hydrocarbons.

PQ-SMPSYS-CAT-30
5.666,66

Gas

   4 Weeks  ]


There are many factors creating obstacles to monitoring gas level directly locating a detector in the required area such as temperature, humidity, dust, air flow and corrosive environments. Prosense provides a sampling system to use in these cases to sample the gas from the area and condition it to perform continuous and accurate detection. The sampling system is a complete solution integrated with necessary detector for measurement. Prosense sampling solution is developed to ensure continuous measurement by sampling from environments where diffusion method cannot be used.

The European Standard EN 1539:2010 defines necessary safety rules and requires continous monitoring for dryers and ovens in which flammable substances are released. The nature of operation in these devices releases flammable and VOC gases/ vapours that needs ventilation. According to this standard plants equipped with a continuous monitoring system can operate up to 50%LEL gas concentration and reduce the ventilation rates.

Reducing process shutdowns and maintenance costs will have a major impact on productivity. Also an operation running with a continuous monitoring system can reduce the ventilation rates and costs which provides less operational costs.

Detector

System has integrated Prosense PQ Series detector(s) to measure target gas/gases. Prosense manufactures a range of state of art detectors to monitor flammable and toxic gases as well as oxygen in different mesaurement ranges that can adaptable for application requirements.

Pump

The sampling system is an integrated structure with a pump that draws air from the environment.The pump is located behind the detector and continuously vacuum the air from the environment to be sampled.

Cooling

System includes a temperature control unit and activates cooling fan depending of the measures temperature on gas pipe.

Filtering

System has a special filter to eliminate any dust, water, oil form the air sampled. Filter can be changed according to air and sampling conditions.

Clean Air/Calibration

System has two solenoid valves to manage air flow to provide clean air to detector in necessary periods. The timer can be set based on end user requirements. Also they can be used for calibration purposes to perform maintenance activities without making any changes on the sampling system

System components
  • 1. Fuses
  • 2. Timer
  • 3. Thermal Control
  • 4. Power Supply
  • 5. Detector
  • 6. Vacuum Pump
  • 7. Flow Adapter
  • 8. Filter
  • 9. Solenoid Valve
  • 10. Cooler
  • 11. Main Power Input
  • 12. Detector Connections
  • 13. Air Out
  • 14. Clean Air/Calibration
  • 15. Drain
  • 16. Air In
  • 17. Thermostat

 Info/Quote Request
 Reseller & Volume Discounts
 Shipping Rates

B2B Checkout Options: Designated Carrier and Tax-Exempt purchase
Payment Options: Credit Card, Credit Card Over the Phone, PAYPAL, Wire Transfer and Check

> ACCESSORIES - RELATED - CONSUMABLES :    4 Items found.
UPY-05T-D
(7036)

PROSENSE  UPY-05T-D

Prosense OLED Display Assembly for PQD series gas detectors



202,40  
P-HH
(7056)

PROSENSE  P-HH

Prosense Handheld Terminal for maintenance, diagnostics, alarm setting, configuration, test and calibration of Prosense PQN, PQD, P and PC3 series gas detectors, uses RS-485 Modbus to connect to the detectors.



337,33  
UPY-05T
(7031)

PROSENSE  UPY-05T

Prosense PQ Transmitter/Main Board for PQD and PQN series gas detectors



384,56  
PQ-SMPSYS-IR-30
(7061)

PROSENSE  PQ-SMPSYS-IR-30

Prosense Sampling System with PQD Infrared Detector to monitor combustible gases. Includes pump, temperature control unit, 100 micron particulate and humidity filter, two solenoid valves, cooler and timer. Modbus RTU, 4-20mA, 2 Alarm and 1 Fault Relay outputs. IP65 ABS plastic enclosure. Can be calibrated to Methane, LPG Propane, Gasoline/Petrol Vapor, Butane, Pentane, Hexane and other Hydrocarbons.

Configure

5.666,66  
Cookie Notice

This online store uses cookies to remember users, enable checkout and to collect aggregate information that allows us to analyze traffic patterns on our site (no personal information is stored). For more information you can read our Privacy Policy.